Precautions for the laying of SLATE yellow wood grain broken and confused

Before the formal laying, the stone plate required by the drawing should be tried according to the pattern, color and texture, and the non-whole board should be discharged in the border part, numbered in two directions after the trial, and then placed neatly according to the number code. According to the horizontal standard line and the design thickness, there are walls and columns around, and the upper level elevation control line of the pop-up surface layer. If there is no positioning pile, the floating slurry and landing ash stuck on the base layer will be removed with a chisel or wire brush, and then the floating soil will be cleaned up with a broom.

Before laying the bonding layer mortar, the base should be moistened, and a plain cement slurry or interface binder should be brushed on the base, and the 1:2.5 dry and rigid cement mortar should be mixed evenly with the brush and laying. The crushed stone plate is placed on the dry mix, levelled with a rubber hammer, and then the granite stone plate is picked up, and the appropriate amount of plain cement is poured on the dry mix.

At the same time, the back of the SLATE and granite stone plate is coated with a thickness of about 1mm of plain cement paste, and then the marble or granite is placed on the dry mix that has been found flat, and the rubber hammer is used to sit flat and upright according to the elevation control line and the square control line. When the SLATE yellow wood grain is broken and confused, the laying direction specified in the construction drawings should be laid in the middle of the pattern according to the cross control plate, and then laid around according to the cross control plate, and check the flatness with 2m ruler and level at any time. When placing large area, it should be placed in sections and divisions.

Check out SLATE, a decorative material used in buildings that people like. SLATE is not only a common stone used in construction projects. In an indoor environment, it has its own unique color and texture. It will be used more widely. Importantly, it plays a very important role in villas, parks, squares, garden communities and other buildings. In architecture, SLATE is not only an eternal base material, but also a decorative material for adding cakes. The color-changing properties of SLATE are a popular material in architectural decoration.